Line Scale Different In Paper Space

Line Scale Different In Paper Space – Oct 8, 2023 products and versions covered issue: If tilemode is set to 0, dash lengths are based on paper space drawing units,. If psltscale is set to 1 then the line type scale for each object is scaled according to the paper space drawing units. Insert the drawing as an xref in the target drawing model.

In the model region view, change. Enter regen after changing these variables. When setting the viewport scale in paper space, the drawing seems to be scaled at the wrong scale, either too big or too small in autocad. The psltscale variable may have different.

Line Scale Different In Paper Space

Currently, it is not possible to scale xrefs causing the linetypes of the objects contained to scale as well. Scaled by the global ltscale factor. How to modify linetype scale?

Do one or more of the following: You can scale linetypes in paper space either based on the drawing units of the space in which the object was created or based on the paper space units. When i plot from paper space with a scale.

With the linetype scale set to 1 it shows up within model space as the batting being thinner than 50mm wide. In the model region view, change msltscale = 1. When i draw a hidden line in model space, it looks and prints like one (dashes).

This article contains information about how the ltscale and psltscale system variables affect linetypes display in. Paper space changes line scale. Set the desired linetype scale in the model area:

Solved (again) Same and scale but different